Spring Security接口放通
北根娃 人气:6在用Spring Security项目开发中，有时候需要放通某一个接口时，我们需要在配置中把接口地址配置上，这样做有时候显得麻烦，而且不够优雅。我们能不能通过一个注解的方式，在需要放通的接口上加上该注解，这样接口就能放通了。答案肯定是可以的啦，今天我们一起来看看实现过程吧。
1.SpringBoot版本
本文基于的Spring Boot的版本是2.6.7
2.实现思路
新建一个AnonymousAccess注解，该注解是应用于Controller方法上的
新建一个存放所有请求方式的枚举类
通过判断Controller方法上是否存在该注解
在SecurityConfig上进行策略的配置
3.实现过程
3.1新建注解
@Inherited
@Documented
@Target({ElementType.METHOD,ElementType.ANNOTATION_TYPE})
@Retention(RetentionPolicy.RUNTIME)
public @interface AnonymousAccess {
}3.2新建请求枚举类
该类是存放所有的请求类型的，代码如下：
@Getter
@AllArgsConstructor
public enum RequestMethodEnum {
/**
* 搜寻 @AnonymousGetMapping
*/
GET("GET"),
/**
* 搜寻 @AnonymousPostMapping
*/
POST("POST"),
/**
* 搜寻 @AnonymousPutMapping
*/
PUT("PUT"),
/**
* 搜寻 @AnonymousPatchMapping
*/
PATCH("PATCH"),
/**
* 搜寻 @AnonymousDeleteMapping
*/
DELETE("DELETE"),
/**
* 否则就是所有 Request 接口都放行
*/
ALL("All");
/**
* Request 类型
*/
private final String type;
public static RequestMethodEnum find(String type) {
for (RequestMethodEnum value : RequestMethodEnum.values()) {
if (value.getType().equals(type)) {
return value;
}
}
return ALL;
}
}3.3判断Controller方法上是否存在该注解
在SecurityConfig类中定义一个私有方法getAnonymousUrl，该方法主要作用是判断controller那些方法加上了AnonymousAccess的注解
private Map<String, Set<String>> getAnonymousUrl(Map<RequestMappingInfo, HandlerMethod> handlerMethodMap) {
Map<String, Set<String>> anonymousUrls = new HashMap<>(8);
Set<String> get = new HashSet<>();
Set<String> post = new HashSet<>();
Set<String> put = new HashSet<>();
Set<String> patch = new HashSet<>();
Set<String> delete = new HashSet<>();
Set<String> all = new HashSet<>();
for (Map.Entry<RequestMappingInfo, HandlerMethod> infoEntry : handlerMethodMap.entrySet()) {
HandlerMethod handlerMethod = infoEntry.getValue();
AnonymousAccess anonymousAccess = handlerMethod.getMethodAnnotation(AnonymousAccess.class);
if (null != anonymousAccess) {
List<RequestMethod> requestMethods = new ArrayList<>(infoEntry.getKey().getMethodsCondition().getMethods());
RequestMethodEnum request = RequestMethodEnum.find(requestMethods.size() == 0 ? RequestMethodEnum.ALL.getType() : requestMethods.get(0).name());
switch (Objects.requireNonNull(request)) {
case GET:
get.addAll(infoEntry.getKey().getPatternsCondition().getPatterns());
break;
case POST:
post.addAll(infoEntry.getKey().getPatternsCondition().getPatterns());
break;
case PUT:
put.addAll(infoEntry.getKey().getPatternsCondition().getPatterns());
break;
case PATCH:
patch.addAll(infoEntry.getKey().getPatternsCondition().getPatterns());
break;
case DELETE:
delete.addAll(infoEntry.getKey().getPatternsCondition().getPatterns());
break;
default:
all.addAll(infoEntry.getKey().getPatternsCondition().getPatterns());
break;
}
}
}
anonymousUrls.put(RequestMethodEnum.GET.getType(), get);
anonymousUrls.put(RequestMethodEnum.POST.getType(), post);
anonymousUrls.put(RequestMethodEnum.PUT.getType(), put);
anonymousUrls.put(RequestMethodEnum.PATCH.getType(), patch);
anonymousUrls.put(RequestMethodEnum.DELETE.getType(), delete);
anonymousUrls.put(RequestMethodEnum.ALL.getType(), all);
return anonymousUrls;
}
3.4在SecurityConfig上进行策略的配置
通过一个SpringUtil工具类获取到requestMappingHandlerMapping的Bean,然后通过getAnonymousUrl方法把标注AnonymousAccess接口找出来。最后，通过antMatchers细腻化到每个 Request 类型。
@Override
protected void configure(HttpSecurity httpSecurity) throws Exception {
// 搜寻匿名标记 url： @AnonymousAccess
RequestMappingHandlerMapping requestMappingHandlerMapping = (RequestMappingHandlerMapping) SpringUtil.getBean("requestMappingHandlerMapping");
Map<RequestMappingInfo, HandlerMethod> handlerMethodMap = requestMappingHandlerMapping.getHandlerMethods();
// 获取匿名标记
Map<String, Set<String>> anonymousUrls = getAnonymousUrl(handlerMethodMap);
httpSecurity
//禁用CSRF
.csrf().disable()
.authorizeRequests()
// 自定义匿名访问所有url放行：细腻化到每个 Request 类型
// GET
.antMatchers(HttpMethod.GET,anonymousUrls.get(RequestMethodEnum.GET.getType()).toArray(new String[0])).permitAll()
// POST
.antMatchers(HttpMethod.POST,anonymousUrls.get(RequestMethodEnum.POST.getType()).toArray(new String[0])).permitAll()
// PUT
.antMatchers(HttpMethod.PUT,anonymousUrls.get(RequestMethodEnum.PUT.getType()).toArray(new String[0])).permitAll()
// PATCH
.antMatchers(HttpMethod.PATCH,anonymousUrls.get(RequestMethodEnum.PATCH.getType()).toArray(new String[0])).permitAll()
// DELETE
.antMatchers(HttpMethod.DELETE,anonymousUrls.get(RequestMethodEnum.DELETE.getType()).toArray(new String[0])).permitAll()
// 所有类型的接口都放行
.antMatchers(anonymousUrls.get(RequestMethodEnum.ALL.getType()).toArray(new String[0])).permitAll()
// 所有请求都需要认证
.anyRequest().authenticated();
}
3.5在Controller方法上应用
在Controller上把需要的放通的接口上加上注解，即可不需要认证就可以访问了，是不是很方便呢。例如，验证码不需要认证访问的，代码如下：
@ApiOperation(value = "获取验证码", notes = "获取验证码")
@AnonymousAccess
@GetMapping("/code")
public Object getCode(){
Captcha captcha = loginProperties.getCaptcha();
String uuid = "code-key-"+IdUtil.simpleUUID();
//当验证码类型为 arithmetic时且长度 >= 2 时，captcha.text()的结果有几率为浮点型
String captchaValue = captcha.text();
if(captcha.getCharType()-1 == LoginCodeEnum.ARITHMETIC.ordinal() && captchaValue.contains(".")){
captchaValue = captchaValue.split("\\.")[0];
}
// 保存
redisUtils.set(uuid,captchaValue,loginProperties.getLoginCode().getExpiration(), TimeUnit.MINUTES);
// 验证码信息
Map<String,Object> imgResult = new HashMap<String,Object>(2){{
put("img",captcha.toBase64());
put("uuid",uuid);
}};
return imgResult;
}3.6效果展示
加载全部内容