bat数值计算

@echo off
call :jia 354687654165435 35486456 ok
echo %ok%
pause

:jia 加法函数（封装）by @随风 @bbs.bathome.net
::计算任意位数的正整数加法
setlocal enabledelayedexpansion&set f=&set "t="
set var1=%~1&set var2=%~2&set /a j=0,n1=0,n2=0
for /l %%a in (0 1 9) do (set vard1=&set "vard2="
set var1=!var1:%%a= %%a !&set var2=!var2:%%a= %%a !)
for %%a in (!var1!)do (set/a n1+=1&set vard1=%%a !vard1!)
for %%a in (!var2!)do (set/a n2+=1&set vard2=%%a !vard2!)
(if !n1! lss !n2! (set var1=%var2%&set "var2=%var1%"
set vard1=%vard2%&set vard2=%vard1%))&set "var2=!var2: =!"
for %%a in (!vard1!) do (if "!var2!"=="" set /a var2=0
set /a a=%%a+!var2:~-1!+j&set t=!a:~-1!!t!&set "a=0!a!"
set "j=!a:~-2,1!"&set var2=!var2:~0,-1!)
if !j! neq 0 set "t=!j!!t!"
Endlocal&set %~3=%t%&goto :EOF

@echo off
call :jian 354687654165435 35486456 ok
echo %ok%
pause
:jian 减法函数（封装）by @随风 @bbs.bathome.net
::计算1000位以内的正整数减法
setlocal enabledelayedexpansion&&set t=&set f=&set "lin="
for /l %%a in (1 1 10) do set "lin=0000000000!lin!"
set lin=!lin!!lin!!lin!!lin!!lin!&set "lin=!lin!!lin!"
set var1=!lin!%~1&set var2=!lin!%~2&set vard1=&set/a j=0
set var1=!var1:~-1000!&set "var2=!var2:~-1000!"
if "!var1!" lss "!var2!" (set var1=%~2&set "var2=%~1"
set "f=-") else set var1=%~1&set "var2=%~2"
for /l %%a in (0 1 9) do set "var1=!var1:%%a= %%a !"
for %%a in (!var1!) do set "vard1=%%a !vard1!"
for %%a in (!vard1!) do (if "!var2!"=="" set/a var2=0
set /a a=%%a-j,b=!var2:~-1!
if !a! lss !b! (set /a a+=10,j=1)else set /a j=0
set /a w=a-b&set t=!w!!t!&set var2=!var2:~0,-1!)
for /f "tokens=* delims=0" %%a in ("!t!") do (
if "%%a"=="" (set t=0) else set "t=%%a")
Endlocal&set %~3=%f%%t%&goto :EOF

@echo off
call :cen 354687654165435 35486456 ok
echo %ok%
pause
:cen 乘法函数（封装）by @随风 @bbs.bathome.net
::计算任意位数的正整数乘法
setlocal enabledelayedexpansion
if "%~1"=="0" Endlocal&set %~3=0&goto :EOF
if "%~2"=="0" Endlocal&set %~3=0&goto :EOF
set f=&set jia=&set ji=&set /a n1=0,n2=0
set vard1=&set "vard2="&set var1=%~1&set "var2=%~2"
for /l %%a in (0 1 9) do (
set var1=!var1:%%a= %%a !&set var2=!var2:%%a= %%a !)
for %%a in (!var1!)do (set /a n1+=1&set vard1=%%a !vard1!)
for %%a in (!var2!)do (set /a n2+=1&set vard2=%%a !vard2!)
if !n1! gtr !n2! (set vard1=%vard2%&set vard2=%vard1%)
for %%a in (!vard1!) do (set "t="&set /a j=0
for %%b in (!vard2!) do (if "!jia!"=="" set /a jia=0
set /a a=%%a*%%b+j+!jia:~-1!&set "t=!a:~-1!!t!"
set a=0!a!&set "j=!a:~-2,1!"&set jia=!jia:~0,-1!)
set "ji=!t:~-1!!ji!"
if "!j:~0,1!"=="0" (set ss=) else set "ss=!j:~0,1!"
set jia=!ss!!t:~0,-1!)
if not "!j:~0,1!"=="0" set "t=!j:~0,1!!t!"
set "ji=!t!!ji:~1!"
Endlocal&set %~3=%ji%&goto :EOF

@echo off
set suru=000012/001200
call :cu0  %suru:/= % ok
echo. %ok%
pause
exit
:cu0 500位内整数除法函数（封装）by @随风 bbs.bathome.net
::函数内有 cu1 cu2 cu3 cu4 四个标签，引用时需注意
setlocal enabledelayedexpansion&set "lin=00000"
set /a zongw=1000,cs1w=0,cs2w=0,falg=0,x=0
if "!str!"=="1" Endlocal&set %~3=%ff%!num!&goto :EOF
if "%~1"=="0" set sang=0&goto cu4
if "!str!"=="0" set sang=以零为除数的错误。&goto cu4
if not defined xiaosu set /a xiaosu=10
for /l %%a in (1 1 5) do set "lin=!lin!!lin!!lin!"
set sang=&set ppp=&set var1=%~1&set "var2=%~2"
for /f "tokens=* delims=0" %%a in ("!var1!")do set var1=%%a
for /f "tokens=* delims=0" %%a in ("!var2!")do set var2=%%a
for /l %%a in (0 1 9)do (set "var1=!var1:%%a= %%a !"
set "var2=!var2:%%a= %%a !")
for %%a in (!var1!) do set /a cs1w+=1
for %%a in (!var2!) do set /a cs2w+=1
for /l %%a in (1 1 10) do (set t=&set cs=%~2&set/a j=0
for /l %%b in (1 1 !cs2w!) do (set /a a=%%a*!cs:~-1!+j
set t=!a:~-1!!t!&set a=0!a!&set "j=!a:~-2,1!"
set cs=!cs:~0,-1!&set cs%%a=&set "bj%%a=")
if !j! neq 0 (set cs%%a=!lin!!j!!t!&set "bj%%a=!j!!t!"
) else set cs%%a=!lin!!t!&set "bj%%a=!t!"
set "cs%%a=!cs%%a:~-%zongw%!")
set var2=!lin!!var2: =!&set "var2=!var2:~-%zongw%!"
set /a cswc=cs1w-cs2w&set "var1=!var1: =!"
if !cswc! lss 0 (set cswc=!cswc:-=!&set/a flag=1
for /l %%a in (1 1 !cswc!)do (
if %%a leq 11 set sang=0!sang!&set /a x=cswc-1
set "var1=!var1!0")
set "sang=!sang:~0,1!.!sang:~1!")
set ppp=!var1:~0,%cs2w%!&set "var1=!var1:~%cs2w%!"
if !flag! equ 1 (set /a bul=1) else set /a bul=0
goto cu2
:cu1
if not defined var1 (set "var1=0"
if not defined ppp goto cu4
if !flag! equ 0 (set sang=!sang!.&set /a flag=1))
set/a bul=1&set ppp=!ppp!!var1:~0,1!&set "var1=!var1:~1!"
:cu2
if !x! geq %xiaosu% goto cu4
set pvar1=!lin!!ppp!&set "pvar1=!pvar1:~-%zongw%!"
if "!pvar1!" lss "!var2!" (
if !bul! equ 1 (set sang=!sang!0&set /a bul=0
if !flag! equ 1 set /a x+=1)
if "!ppp:~0,1!"=="0" set "ppp="
goto cu1)
if !flag! equ 1 set /a x+=1
set /a bul=0
::计算商
for /l %%a in (1 1 10) do (
if "!cs%%a!" equ "!pvar1!" (
set "sang=!sang!%%a"&set "yu=!bj%%a!"&goto cu3)
if "!cs%%a!" gtr "!pvar1!" (set /a s=%%a-1
set "sang=!sang!!s!"&set yu=!t!&goto cu3)
set "t=!bj%%a!")
:cu3 计算差
set cjs=!ppp!&set cj1=&set m=&set/a jjj=0
for /l %%a in (0 1 9) do set "cjs=!cjs:%%a= %%a !"
for %%a in (!cjs!) do set "cj1=%%a !cj1!"
for %%a in (!cj1!) do (if "!yu!"=="" set/a yu=0
set /a a=%%a-jjj,b=!yu:~-1!
if !a! lss !b! (set /a a+=10,jjj=1)else set/a jjj=0
set /a w=a-b&set m=!w!!m!&set yu=!yu:~0,-1!)
for /f "tokens=* delims=0" %%m in ("!m!") do (
if "%%m"=="" (set m=0) else set "m=%%m")
if !m! equ 0 (
if "!var1:0=!"=="" set sang=!sang!!var1!&goto cu4
set ppp=&goto cu1) else set "ppp=!m!"
goto cu2
:cu4
if "!sang:~0,1!"=="." set "sang=0!sang!"
Endlocal&set %~3=%ff%%sang%&goto :EOF

@echo off
set t=%time%
call :time0 "%t%" "%time%" ok
echo %ok%
pause

:time0  计算时间差 （封装）
@echo off&setlocal&set /a n=0&rem code 随风 @bbs.bathome.net
for /f "tokens=1-8 delims=.: " %%a in ("%~1:%~2") do (
set /a n+=10%%a%%100*360000+10%%b%%100*6000+10%%c%%100*100+10%%d%%100
set /a n-=10%%e%%100*360000+10%%f%%100*6000+10%%g%%100*100+10%%h%%100)
set /a s=n/360000,n=n%%360000,f=n/6000,n=n%%6000,m=n/100,n=n%%100
set "ok=%s% 小时 %f% 分钟 %m% 秒 %n% 毫秒"
endlocal&set %~3=%ok:-=%&goto :EOF

@echo off
:start
setlocal enabledelayedexpansion&cls
for /l %%a in (1 1 10) do set str=!str! !random!
echo.&echo %str%
call :sort "%str%" ok
echo  %ok%
pause>nul
endlocal&goto start
:sort 可以处理0开头的数、重复数及200位以内的超大整数（封装）
@echo off&setlocal enabledelayedexpansion
for /f "delims==" %%a in ('set p. 2^>nul')do set "%%a="
for /l %%a in (1 1 20) do set "p.lin=0000000000!p.lin!"
for %%a in (%~1) do (set s=!p.lin!%%a&set "s=!s:~-200!"
if defined p...!s! (set p..%%a=!p..%%a! %%a
set p...!s!=!p..%%a! %%a) else (set p...!s!=%%a))
for /f "tokens=2 delims==" %%a in ('set p...') do (
for %%i in (%%a) do set "p.ok=!p.ok! %%i")
endlocal&set %~2=%p.ok:~1%&goto :EOF

@echo off
:start
setlocal&cls
set /p tian=      请指定要追溯的天数：&echo\
call :Date2Day "%date%" %tian% ok
echo       %ok%
endlocal&pause>nul&goto start
:Date2Day 计算指定天数 前/后 的日期及星期 （封装）
@echo off&setlocal ENABLEEXTENSIONS
for /f "tokens=1-3 delims=/-:\, " %%a in ('echo/%~1') do (
set /a yy=%%a,mm=100%%b%%100,dd=100%%c%%100)
set /a z=14-mm,z/=12,y=yy+4800-z,m=mm+12*z-3,j=153*m+2
set /a j=j/5+dd+y*365+y/4-y/100+y/400-2472633
set /a i=j-%~2,a=i+2472632,b=4*a+3,b/=146097,c=-b*146097,c/=4,c+=a
set /a d=4*c+3,d/=1461,e=-1461*d,e/=4,e+=c,m=5*e+2,m/=153,dd=153*m+2,dd/=5
set /a dd=-dd+e+1,mm=-m/10,mm*=12,mm+=m+3,yy=b*100+d-4800+m/10
(if %mm% LSS 10 set mm=0%mm%)&(if %dd% LSS 10 set dd=0%dd%)
for %%a in (一/1 二/2 三/3 四/4 五/5 六/6 日/0) do (
for /f "tokens=1,2 delims=/" %%i in ("%%a")do set %%i=%%j&set ".%%j=%%i")
if %~2 gtr 0 (set /a d=^(7-%~2%%7+%date:~-1%^)%%7&set x=前) else (
set /a d=^(~%~2+1+%date:~-1%^)%%7&set x=后)
call set "d=星期%%.%d%%%"
endlocal&set %~3=%yy%-%mm%-%dd% %d%&goto :EOF

@echo off&color 1f&set /a q=10,h=2
title 任意进制互转 默认：%q%进制转%h%进制
:start
setlocal&echo.&echo. 被转换的数 被转换数的进制 需转换成的进制
echo.&echo. 如：95 16 10  表示将 16进制数95 转换 为10进制数
echo.&echo. 参数可用分割符为  空格 / + - \  如：95/16/10 或95+16+10
echo.&echo. 默认将 10进制 转换为 2进制（即上例中如果不输入 16 10 则默认为 10 2）
echo.&set /p num= 请输入需转换的数 &cls
if not defined num endlocal&goto start
for /f "tokens=1-3 delims=/+-\ " %%a in ("%num%") do (
    set "num=%%a"
    if not "%%b"=="" if not "%%c"=="" set /a q=%%b,h=%%c
)
call :nxn "%num%" ok %q% %h%
for /l %%a in (1 1 12)do (
   if %%a equ 4 (
      echo. %q%进制转%h%进制 结果
      echo.&echo. %num% = %ok%
    )else echo\
)
set /a w=%random%%%2
if %w% equ 1 (set f=1f) else (set f=df)
color %f%&endlocal&goto start
::函数使用方法：call :nxn "98" ok 10 2
::call :nxn "被转换的数" 保存结果的变量名 被转换数的进制 需转换成的进制
::默认将 10进制 转换为 2进制（即上例中不输入 10 2）
:nXn 任意进制互转 @随风 @bbs.bathome.net（封装）
@echo off&setlocal enabledelayedexpansion
if "%~4"=="" (set /a q=10,h=2)else (set /a q=%~3,h=%~4)
set "str=0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
for /l %%a in (0 1 35)do set .%%a=!str:~%%a,1!&set ".!str:~%%a,1!=%%a"
set sun=&set jie=&set "var=%~1"&set /a nnn=1,num=0
for /l %%a in (0 1 100) do (
if not "!var:~%%a,1!"=="" (call set sun=%%.!var:~%%a,1!%% !sun!))
for %%a in (!sun!) do set /a num=%%a*nnn+num,nnn*=q
:10进制转n进制
set /a yu=num%%h,num/=h
set "jie=!.%yu%!!jie!"&if !num! gtr 0 goto 10进制转n进制
endlocal&set %~2=%jie%&goto :EOF

@echo off&color 1f&title 二进制 转 十六进制
call :2x16 "11111111 11111111 11111111 11111110" ok
echo %ok%
pause
::以4位一段，分别转换为十六进制,不必考虑超大数问题
:2x16 二进制 转 十六进制  @随风 @bbs.bathome.net （封装）
@echo off&setlocal enabledelayedexpansion
set "str=0123456789ABCDEF"
set k=&set kk=&set xx=&set "x=000%~1"
set x=!x:0= 0!&set x=!x:1= 1!&set /a jj=0,ss=1
for %%a in (!x!) do set "xx=%%a !xx!"
for %%a in (!xx!) do (set /a jj+=%%a*ss,ss=ss*2
if !ss! equ 16 set k=!jj! !k!&set /a jj=0,ss=1)
for %%a in (!k!) do set kk=!kk!!str:~%%a,1!
endlocal&set %~2=%kk%&goto :EOF

@echo off&color 1f&title 十六进制 转 二进制
set mmm=bfa35e7d8
call :16x2 %mmm% ok
echo.&echo  十六进制 %mmm%
echo.&echo    二进制 %ok%
echo.&pause
::以4位一段，分别转换为二进制,不必考虑超大数问题
:16x2 十六进制 转 二进制  @随风 @bbs.bathome.net （封装）
@echo off&setlocal enabledelayedexpansion
set str=0123456789abcdef&set ok=&set "num=%~1"
for /l %%a in (0 1 15) do (set ".!str:~%%a,1!=%%a"
call set "num=%%num:!str:~%%a,1!= !str:~%%a,1!%%")
for %%i in (!num!) do (set /a x=0,n=!.%%i!
for %%a in (8 4 2 1) do (set /a x+=%%a
if !n! geq !x! (set ok=!ok!1) else (
set ok=!ok!0&set /a x-=%%a)))
endlocal&set %~2=%ok%&goto :EOF

@echo off
call :2x10 01100100 ok
echo %ok%
pause
:2x10  2进制转 10进制 @随风 @bbs.bathome.net （封装）
@echo off&setlocal enabledelayedexpansion
set /a nnn=1,num=0&set nn=&set "n=%~1"
set "n=!n:0= 0!"&set "n=!n:1= 1!"
for %%a in (!n!) do set "nn=%%a !nn!"
for %%a in (!nn!) do set /a num+=%%a*nnn,nnn*=2
endlocal&set %~2=%num%&goto :EOF

@echo off&color 1f&title 获取10进制数的 原码、反码、补码
::获取10进制数的 原码、反码、补码
::计算机中 负数用补码表达
::补码：反码+1
::反码：将二进制数（原码）按位取反 （即：1变0、0变1）
::原码：一个整数，按照绝对值大小转换成的二进制数，称为原码。
::个人理解为在计算机中表达负数的二进制数叫补码
::所以以下代码中，若输入的是负数则结果中补码代表该数
@echo off&rem @随风 @bbs.bathome.net @2009-01-15
:start
setlocal enabledelayedexpansion
for /l %%a in (1 1 15) do set "lin=00000!lin!"
echo.&echo.&set /p y10= 请输入一个10进制数可以为负数 &cls
if !y10! lss 0 (set /a n="~y10"+1,c=1) else set /a n=y10,c=1
:10x2 将10进制转成2进制 原码
set /a y=n%%2,n/=2&set "j=!y!!j!"&if !n! gtr 0 goto 10x2
set j=!lin!!j!&set "j=!j:~-32!"
set ss=!j:0= 0!&set "ss=!ss:1= 1!"
:: 获取反码
for %%a in (%ss%) do set /a n="^!%%a"&set "f=!f!!n!"
set f=!lin!!f!&set f=!f:~-32!&set "ss=!f!"
:buma 获取补码
set /a m=!ss:~-1!+c
if !m! gtr 1 (set c=1&set b=0!b!)else set c=0&set "b=!m!!b!"
set "ss=!ss:~0,-1!"
if defined ss goto buma
echo.
echo  10进制数  %y10%&echo.
echo      原码  %j:~-32,8% %j:~-24,8% %j:~-16,8% %j:~-8%
echo      反码  %f:~-32,8% %f:~-24,8% %f:~-16,8% %f:~-8%
echo      补码  %b:~-32,8% %b:~-24,8% %b:~-16,8% %b:~-8%
endlocal&goto start

@echo off
::转换 2、8、10、16、进制数并显示2进制 原码、反码、补码
::计算机中 负数用补码表达
::补码：反码+1
::反码：将二进制数（原码）按位取反 （即：1变0、0变1）
::原码：一个整数，按照绝对值大小转换成的二进制数，称为原码。
::个人理解为在计算机中表达负数的二进制数叫补码
::完全不懂计算机，只理解为计算机中负数用补码表达
::代码中二进制数用32位显示，超出32位的会出错
::只能处理cmd范围内的数
@echo off&title 转换 2、8、10、16、进制数并显示2进制 原码、反码、补码
::@随风 @bbs.bathome.net @2009-1-12
set "str=0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
set "color1=1f&set color2=df"&color 1f
for /l %%a in (0 1 35) do (
   call set ".%%a=%%str:~%%a,1%%"
   call set ".%%str:~%%a,1%%=%%a"
)
:start
setlocal enabledelayedexpansion&color %color1%
echo.
echo. ┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
echo. ┃                                                          ┃
echo. ┃输入格式：需转换的数+该数的进制（可用分割符 / \ + - 空格）┃
echo. ┃                                                          ┃
echo. ┃默认输入的为10进制数、也可以是2、8、16进制、但必须指明进制┃
echo. ┃                                                          ┃
echo. ┃如：需转换16进制 2afd 则输入 2afd+16  10进制数则不需要指明┃
echo. ┃                                                          ┃
echo. ┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛
echo.&set /p num= 请输入需转换的数  &cls
if not defined num endlocal&goto start
for /f "tokens=1,2 delims=/\+- " %%a in ("%num%") do (
   set "n0=%%a"
   if "%%b"=="" (set jz=10) else set /a jz=%%b
)
echo.&echo    被转换的数为: !jz!进制数  !n0!&echo.
if !jz! equ 16 (set /a n10=0x!n0!) else (
   if !jz! equ 10 (set n10=!n0!) else (
      if !jz! equ 8 (set /a n10=0!n0!) else (
         set /a nnn=1,n10=0&call :2x10 !n0!
)))
for %%a in (16 10 8 2) do call :10进制转n进制 !n10! %%a
echo.&call :yuan&echo.
endlocal&set color1=%color2%&set "color2=%color1%"
goto start
:10进制转n进制
set /a yu=n10%%%~2,n10/=%~2
set "jie=!.%yu%!!jie!"&if !n10! gtr 0 goto 10进制转n进制
set "xs=         %~2"
echo !xs:~-5! 进制  !jie!
set d2=!jie!&set jie=&set "n10=%~1"
goto :EOF
:2x10  2进制转10进制
set /a n10+=!n0:~-1!*nnn,nnn*=2
set "n0=!n0:~0,-1!"
if defined n0 goto 2x10
goto :EOF
:yuan
for /l %%a in (1 1 15) do set lin=00000!lin!
set j=!lin!!d2!&set "j=!j:~-32!"
set ss=!j:0= 0!&set "ss=!ss:1= 1!"
:: 获取反码
for %%a in (%ss%) do set /a n="^!%%a"&set "f=!f!!n!"
set f=!lin!!f!&set f=!f:~-32!&set "ss=!f!"
set /a c=1
:buma 获取补码
set /a m=!ss:~-1!+c
if !m! gtr 1 (set c=1&set b=0!b!)else set c=0&set "b=!m!!b!"
set "ss=!ss:~0,-1!"
if defined ss goto buma
echo       原码  %j:~-32,8% %j:~-24,8% %j:~-16,8% %j:~-8%
echo       反码  %f:~-32,8% %f:~-24,8% %f:~-16,8% %f:~-8%
echo       补码  %b:~-32,8% %b:~-24,8% %b:~-16,8% %b:~-8%
goto :EOF