亲宝软件园·资讯

展开

Redis中LRU淘汰策略的深入分析

人气:0

前言

Redis作为缓存使用时,一些场景下要考虑内存的空间消耗问题。Redis会删除过期键以释放空间,过期键的删除策略有两种:

另外,Redis也可以开启LRU功能来自动淘汰一些键值对。

LRU算法

当需要从缓存中淘汰数据时,我们希望能淘汰那些将来不可能再被使用的数据,保留那些将来还会频繁访问的数据,但最大的问题是缓存并不能预言未来。一个解决方法就是通过LRU进行预测:最近被频繁访问的数据将来被访问的可能性也越大。缓存中的数据一般会有这样的访问分布:一部分数据拥有绝大部分的访问量。当访问模式很少改变时,可以记录每个数据的最后一次访问时间,拥有最少空闲时间的数据可以被认为将来最有可能被访问到。

举例如下的访问模式,A每5s访问一次,B每2s访问一次,C与D每10s访问一次,|代表计算空闲时间的截止点:

~~~~~A~~~~~A~~~~~A~~~~A~~~~~A~~~~~A~~|
~~B~~B~~B~~B~~B~~B~~B~~B~~B~~B~~B~~B~|
~~~~~~~~~~C~~~~~~~~~C~~~~~~~~~C~~~~~~|
~~~~~D~~~~~~~~~~D~~~~~~~~~D~~~~~~~~~D|

可以看到,LRU对于A、B、C工作的很好,完美预测了将来被访问到的概率B>A>C,但对于D却预测了最少的空闲时间。

但是,总体来说,LRU算法已经是一个性能足够好的算法了

LRU配置参数

Redis配置中和LRU有关的有三个:

淘汰策略

淘汰策略即maxmemory_policy的赋值有以下几种:

volatile-lru, volatile-random和volatile-ttl这三个淘汰策略使用的不是全量数据,有可能无法淘汰出足够的内存空间。在没有过期键或者没有设置超时属性的键的情况下,这三种策略和noeviction差不多。

一般的经验规则:

volatile-lru 和 volatile-random策略,当你想要使用单一的Redis实例来同时实现缓存淘汰和持久化一些经常使用的键集合时很有用。未设置过期时间的键进行持久化保存,设置了过期时间的键参与缓存淘汰。不过一般运行两个实例是解决这个问题的更好方法。

为键设置过期时间也是需要消耗内存的,所以使用allkeys-lru这种策略更加节省空间,因为这种策略下可以不为键设置过期时间。

近似LRU算法

我们知道,LRU算法需要一个双向链表来记录数据的最近被访问顺序,但是出于节省内存的考虑,Redis的LRU算法并非完整的实现。Redis并不会选择最久未被访问的键进行回收,相反它会尝试运行一个近似LRU的算法,通过对少量键进行取样,然后回收其中的最久未被访问的键。通过调整每次回收时的采样数量maxmemory-samples,可以实现调整算法的精度。

根据Redis作者的说法,每个Redis Object可以挤出24 bits的空间,但24 bits是不够存储两个指针的,而存储一个低位时间戳是足够的,Redis Object以秒为单位存储了对象新建或者更新时的unix time,也就是LRU clock,24 bits数据要溢出的话需要194天,而缓存的数据更新非常频繁,已经足够了。

Redis的键空间是放在一个哈希表中的,要从所有的键中选出一个最久未被访问的键,需要另外一个数据结构存储这些源信息,这显然不划算。最初,Redis只是随机的选3个key,然后从中淘汰,后来算法改进到了N个key的策略,默认是5个。

Redis3.0之后又改善了算法的性能,会提供一个待淘汰候选key的pool,里面默认有16个key,按照空闲时间排好序。更新时从Redis键空间随机选择N个key,分别计算它们的空闲时间idle,key只会在pool不满或者空闲时间大于pool里最小的时,才会进入pool,然后从pool中选择空闲时间最大的key淘汰掉。

真实LRU算法与近似LRU的算法可以通过下面的图像对比:

浅灰色带是已经被淘汰的对象,灰色带是没有被淘汰的对象,绿色带是新添加的对象。可以看出,maxmemory-samples值为5时Redis 3.0效果比Redis 2.8要好。使用10个采样大小的Redis 3.0的近似LRU算法已经非常接近理论的性能了。

数据访问模式非常接近幂次分布时,也就是大部分的访问集中于部分键时,LRU近似算法会处理得很好。

在模拟实验的过程中,我们发现如果使用幂次分布的访问模式,真实LRU算法和近似LRU算法几乎没有差别。

LRU源码分析

Redis中的键与值都是redisObject对象:

typedef struct redisObject {
 unsigned type:4;
 unsigned encoding:4;
 unsigned lru:LRU_BITS; /* LRU time (relative to global lru_clock) or
       * LFU data (least significant 8 bits frequency
       * and most significant 16 bits access time). */
 int refcount;
 void *ptr;
} robj;

unsigned的低24 bits的lru记录了redisObj的LRU time。

Redis命令访问缓存的数据时,均会调用函数lookupKey:

robj *lookupKey(redisDb *db, robj *key, int flags) {
 dictEntry *de = dictFind(db->dict,key->ptr);
 if (de) {
  robj *val = dictGetVal(de);

  /* Update the access time for the ageing algorithm.
   * Don't do it if we have a saving child, as this will trigger
   * a copy on write madness. */
  if (server.rdb_child_pid == -1 &&
   server.aof_child_pid == -1 &&
   !(flags & LOOKUP_NOTOUCH))
  {
   if (server.maxmemory_policy & MAXMEMORY_FLAG_LFU) {
    updateLFU(val);
   } else {
    val->lru = LRU_CLOCK();
   }
  }
  return val;
 } else {
  return NULL;
 }
}

该函数在策略为LRU(非LFU)时会更新对象的lru值, 设置为LRU_CLOCK()值:

/* Return the LRU clock, based on the clock resolution. This is a time
 * in a reduced-bits format that can be used to set and check the
 * object->lru field of redisObject structures. */
unsigned int getLRUClock(void) {
 return (mstime()/LRU_CLOCK_RESOLUTION) & LRU_CLOCK_MAX;
}

/* This function is used to obtain the current LRU clock.
 * If the current resolution is lower than the frequency we refresh the
 * LRU clock (as it should be in production servers) we return the
 * precomputed value, otherwise we need to resort to a system call. */
unsigned int LRU_CLOCK(void) {
 unsigned int lruclock;
 if (1000/server.hz <= LRU_CLOCK_RESOLUTION) {
  atomicGet(server.lruclock,lruclock);
 } else {
  lruclock = getLRUClock();
 }
 return lruclock;
}

LRU_CLOCK()取决于LRU_CLOCK_RESOLUTION(默认值1000),LRU_CLOCK_RESOLUTION代表了LRU算法的精度,即一个LRU的单位是多长。server.hz代表服务器刷新的频率,如果服务器的时间更新精度值比LRU的精度值要小,LRU_CLOCK()直接使用服务器的时间,减小开销。

Redis处理命令的入口是processCommand:

int processCommand(client *c) {

 /* Handle the maxmemory directive.
  *
  * Note that we do not want to reclaim memory if we are here re-entering
  * the event loop since there is a busy Lua script running in timeout
  * condition, to avoid mixing the propagation of scripts with the
  * propagation of DELs due to eviction. */
 if (server.maxmemory && !server.lua_timedout) {
  int out_of_memory = freeMemoryIfNeededAndSafe() == C_ERR;
  /* freeMemoryIfNeeded may flush slave output buffers. This may result
   * into a slave, that may be the active client, to be freed. */
  if (server.current_client == NULL) return C_ERR;

  /* It was impossible to free enough memory, and the command the client
   * is trying to execute is denied during OOM conditions or the client
   * is in MULTI/EXEC context? Error. */
  if (out_of_memory &&
   (c->cmd->flags & CMD_DENYOOM ||
    (c->flags & CLIENT_MULTI && c->cmd->proc != execCommand))) {
   flagTransaction(c);
   addReply(c, shared.oomerr);
   return C_OK;
  }
 }
}

只列出了释放内存空间的部分,freeMemoryIfNeededAndSafe为释放内存的函数:

int freeMemoryIfNeeded(void) {
 /* By default replicas should ignore maxmemory
  * and just be masters exact copies. */
 if (server.masterhost && server.repl_slave_ignore_maxmemory) return C_OK;

 size_t mem_reported, mem_tofree, mem_freed;
 mstime_t latency, eviction_latency;
 long long delta;
 int slaves = listLength(server.slaves);

 /* When clients are paused the dataset should be static not just from the
  * POV of clients not being able to write, but also from the POV of
  * expires and evictions of keys not being performed. */
 if (clientsArePaused()) return C_OK;
 if (getMaxmemoryState(&mem_reported,NULL,&mem_tofree,NULL) == C_OK)
  return C_OK;

 mem_freed = 0;

 if (server.maxmemory_policy == MAXMEMORY_NO_EVICTION)
  goto cant_free; /* We need to free memory, but policy forbids. */

 latencyStartMonitor(latency);
 while (mem_freed < mem_tofree) {
  int j, k, i, keys_freed = 0;
  static unsigned int next_db = 0;
  sds bestkey = NULL;
  int bestdbid;
  redisDb *db;
  dict *dict;
  dictEntry *de;

  if (server.maxmemory_policy & (MAXMEMORY_FLAG_LRU|MAXMEMORY_FLAG_LFU) ||
   server.maxmemory_policy == MAXMEMORY_VOLATILE_TTL)
  {
   struct evictionPoolEntry *pool = EvictionPoolLRU;

   while(bestkey == NULL) {
    unsigned long total_keys = 0, keys;

    /* We don't want to make local-db choices when expiring keys,
     * so to start populate the eviction pool sampling keys from
     * every DB. */
    for (i = 0; i < server.dbnum; i++) {
     db = server.db+i;
     dict = (server.maxmemory_policy & MAXMEMORY_FLAG_ALLKEYS) ?
       db->dict : db->expires;
     if ((keys = dictSize(dict)) != 0) {
      evictionPoolPopulate(i, dict, db->dict, pool);
      total_keys += keys;
     }
    }
    if (!total_keys) break; /* No keys to evict. */

    /* Go backward from best to worst element to evict. */
    for (k = EVPOOL_SIZE-1; k >= 0; k--) {
     if (pool[k].key == NULL) continue;
     bestdbid = pool[k].dbid;

     if (server.maxmemory_policy & MAXMEMORY_FLAG_ALLKEYS) {
      de = dictFind(server.db[pool[k].dbid].dict,
       pool[k].key);
     } else {
      de = dictFind(server.db[pool[k].dbid].expires,
       pool[k].key);
     }

     /* Remove the entry from the pool. */
     if (pool[k].key != pool[k].cached)
      sdsfree(pool[k].key);
     pool[k].key = NULL;
     pool[k].idle = 0;

     /* If the key exists, is our pick. Otherwise it is
      * a ghost and we need to try the next element. */
     if (de) {
      bestkey = dictGetKey(de);
      break;
     } else {
      /* Ghost... Iterate again. */
     }
    }
   }
  }

  /* volatile-random and allkeys-random policy */
  else if (server.maxmemory_policy == MAXMEMORY_ALLKEYS_RANDOM ||
     server.maxmemory_policy == MAXMEMORY_VOLATILE_RANDOM)
  {
   /* When evicting a random key, we try to evict a key for
    * each DB, so we use the static 'next_db' variable to
    * incrementally visit all DBs. */
   for (i = 0; i < server.dbnum; i++) {
    j = (++next_db) % server.dbnum;
    db = server.db+j;
    dict = (server.maxmemory_policy == MAXMEMORY_ALLKEYS_RANDOM) ?
      db->dict : db->expires;
    if (dictSize(dict) != 0) {
     de = dictGetRandomKey(dict);
     bestkey = dictGetKey(de);
     bestdbid = j;
     break;
    }
   }
  }

  /* Finally remove the selected key. */
  if (bestkey) {
   db = server.db+bestdbid;
   robj *keyobj = createStringObject(bestkey,sdslen(bestkey));
   propagateExpire(db,keyobj,server.lazyfree_lazy_eviction);
   /* We compute the amount of memory freed by db*Delete() alone.
    * It is possible that actually the memory needed to propagate
    * the DEL in AOF and replication link is greater than the one
    * we are freeing removing the key, but we can't account for
    * that otherwise we would never exit the loop.
    *
    * AOF and Output buffer memory will be freed eventually so
    * we only care about memory used by the key space. */
   delta = (long long) zmalloc_used_memory();
   latencyStartMonitor(eviction_latency);
   if (server.lazyfree_lazy_eviction)
    dbAsyncDelete(db,keyobj);
   else
    dbSyncDelete(db,keyobj);
   latencyEndMonitor(eviction_latency);
   latencyAddSampleIfNeeded("eviction-del",eviction_latency);
   latencyRemoveNestedEvent(latency,eviction_latency);
   delta -= (long long) zmalloc_used_memory();
   mem_freed += delta;
   server.stat_evictedkeys++;
   notifyKeyspaceEvent(NOTIFY_EVICTED, "evicted",
    keyobj, db->id);
   decrRefCount(keyobj);
   keys_freed++;

   /* When the memory to free starts to be big enough, we may
    * start spending so much time here that is impossible to
    * deliver data to the slaves fast enough, so we force the
    * transmission here inside the loop. */
   if (slaves) flushSlavesOutputBuffers();

   /* Normally our stop condition is the ability to release
    * a fixed, pre-computed amount of memory. However when we
    * are deleting objects in another thread, it's better to
    * check, from time to time, if we already reached our target
    * memory, since the "mem_freed" amount is computed only
    * across the dbAsyncDelete() call, while the thread can
    * release the memory all the time. */
   if (server.lazyfree_lazy_eviction && !(keys_freed % 16)) {
    if (getMaxmemoryState(NULL,NULL,NULL,NULL) == C_OK) {
     /* Let's satisfy our stop condition. */
     mem_freed = mem_tofree;
    }
   }
  }

  if (!keys_freed) {
   latencyEndMonitor(latency);
   latencyAddSampleIfNeeded("eviction-cycle",latency);
   goto cant_free; /* nothing to free... */
  }
 }
 latencyEndMonitor(latency);
 latencyAddSampleIfNeeded("eviction-cycle",latency);
 return C_OK;

cant_free:
 /* We are here if we are not able to reclaim memory. There is only one
  * last thing we can try: check if the lazyfree thread has jobs in queue
  * and wait... */
 while(bioPendingJobsOfType(BIO_LAZY_FREE)) {
  if (((mem_reported - zmalloc_used_memory()) + mem_freed) >= mem_tofree)
   break;
  usleep(1000);
 }
 return C_ERR;
}

/* This is a wrapper for freeMemoryIfNeeded() that only really calls the
 * function if right now there are the conditions to do so safely:
 *
 * - There must be no script in timeout condition.
 * - Nor we are loading data right now.
 *
 */
int freeMemoryIfNeededAndSafe(void) {
 if (server.lua_timedout || server.loading) return C_OK;
 return freeMemoryIfNeeded();
}

几种淘汰策略maxmemory_policy就是在这个函数里面实现的。

当采用LRU时,可以看到,从0号数据库开始(默认16个),根据不同的策略,选择redisDb的dict(全部键)或者expires(有过期时间的键),用来更新候选键池子pool,pool更新策略是evictionPoolPopulate:

void evictionPoolPopulate(int dbid, dict *sampledict, dict *keydict, struct evictionPoolEntry *pool) {
 int j, k, count;
 dictEntry *samples[server.maxmemory_samples];

 count = dictGetSomeKeys(sampledict,samples,server.maxmemory_samples);
 for (j = 0; j < count; j++) {
  unsigned long long idle;
  sds key;
  robj *o;
  dictEntry *de;

  de = samples[j];
  key = dictGetKey(de);

  /* If the dictionary we are sampling from is not the main
   * dictionary (but the expires one) we need to lookup the key
   * again in the key dictionary to obtain the value object. */
  if (server.maxmemory_policy != MAXMEMORY_VOLATILE_TTL) {
   if (sampledict != keydict) de = dictFind(keydict, key);
   o = dictGetVal(de);
  }

  /* Calculate the idle time according to the policy. This is called
   * idle just because the code initially handled LRU, but is in fact
   * just a score where an higher score means better candidate. */
  if (server.maxmemory_policy & MAXMEMORY_FLAG_LRU) {
   idle = estimateObjectIdleTime(o);
  } else if (server.maxmemory_policy & MAXMEMORY_FLAG_LFU) {
   /* When we use an LRU policy, we sort the keys by idle time
    * so that we expire keys starting from greater idle time.
    * However when the policy is an LFU one, we have a frequency
    * estimation, and we want to evict keys with lower frequency
    * first. So inside the pool we put objects using the inverted
    * frequency subtracting the actual frequency to the maximum
    * frequency of 255. */
   idle = 255-LFUDecrAndReturn(o);
  } else if (server.maxmemory_policy == MAXMEMORY_VOLATILE_TTL) {
   /* In this case the sooner the expire the better. */
   idle = ULLONG_MAX - (long)dictGetVal(de);
  } else {
   serverPanic("Unknown eviction policy in evictionPoolPopulate()");
  }

  /* Insert the element inside the pool.
   * First, find the first empty bucket or the first populated
   * bucket that has an idle time smaller than our idle time. */
  k = 0;
  while (k < EVPOOL_SIZE &&
    pool[k].key &&
    pool[k].idle < idle) k++;
  if (k == 0 && pool[EVPOOL_SIZE-1].key != NULL) {
   /* Can't insert if the element is < the worst element we have
    * and there are no empty buckets. */
   continue;
  } else if (k < EVPOOL_SIZE && pool[k].key == NULL) {
   /* Inserting into empty position. No setup needed before insert. */
  } else {
   /* Inserting in the middle. Now k points to the first element
    * greater than the element to insert. */
   if (pool[EVPOOL_SIZE-1].key == NULL) {
    /* Free space on the right? Insert at k shifting
     * all the elements from k to end to the right. */

    /* Save SDS before overwriting. */
    sds cached = pool[EVPOOL_SIZE-1].cached;
    memmove(pool+k+1,pool+k,
     sizeof(pool[0])*(EVPOOL_SIZE-k-1));
    pool[k].cached = cached;
   } else {
    /* No free space on right? Insert at k-1 */
    k--;
    /* Shift all elements on the left of k (included) to the
     * left, so we discard the element with smaller idle time. */
    sds cached = pool[0].cached; /* Save SDS before overwriting. */
    if (pool[0].key != pool[0].cached) sdsfree(pool[0].key);
    memmove(pool,pool+1,sizeof(pool[0])*k);
    pool[k].cached = cached;
   }
  }

  /* Try to reuse the cached SDS string allocated in the pool entry,
   * because allocating and deallocating this object is costly
   * (according to the profiler, not my fantasy. Remember:
   * premature optimizbla bla bla bla. */
  int klen = sdslen(key);
  if (klen > EVPOOL_CACHED_SDS_SIZE) {
   pool[k].key = sdsdup(key);
  } else {
   memcpy(pool[k].cached,key,klen+1);
   sdssetlen(pool[k].cached,klen);
   pool[k].key = pool[k].cached;
  }
  pool[k].idle = idle;
  pool[k].dbid = dbid;
 }
}

Redis随机选择maxmemory_samples数量的key,然后计算这些key的空闲时间idle time,当满足条件时(比pool中的某些键的空闲时间还大)就可以进pool。pool更新之后,就淘汰pool中空闲时间最大的键。

estimateObjectIdleTime用来计算Redis对象的空闲时间:

/* Given an object returns the min number of milliseconds the object was never
 * requested, using an approximated LRU algorithm. */
unsigned long long estimateObjectIdleTime(robj *o) {
 unsigned long long lruclock = LRU_CLOCK();
 if (lruclock >= o->lru) {
  return (lruclock - o->lru) * LRU_CLOCK_RESOLUTION;
 } else {
  return (lruclock + (LRU_CLOCK_MAX - o->lru)) *
     LRU_CLOCK_RESOLUTION;
 }
}

空闲时间基本就是就是对象的lru和全局的LRU_CLOCK()的差值乘以精度LRU_CLOCK_RESOLUTION,将秒转化为了毫秒。

参考链接

总结

以上就是这篇文章的全部内容了,希望本文的内容对大家的学习或者工作具有一定的参考学习价值,谢谢大家对的支持。

您可能感兴趣的文章:

加载全部内容

相关教程
猜你喜欢
用户评论