Oracle11G DG 搭建及管理

时间:2020-02-21 浮生若夢sky 人气:1

一、准备工作

环境准备
主数据库Oracle Database安装
备服务器Oracle Database software 安装

二、正式配置

三、基本管理

--------------------------------------------------------------分割线-------------------------------------------------------------

一、准备工作

1.环境配置：

主机配置

节点	操作系统	主机名称	IP地址
主库	CentOS6.4_x86_64	dgp	192.168.10.61
备库	CentOS6.4_x86_64	dgs	192.168.10.62

修改主机名：

[root@db /]# cat /etc/sysconfig/network
[root@db /]# sed -i s/HOSTNAME=.*/HOSTNAME=dgp/ /etc/sysconfig/network
[root@db /]# reboot

规划数据库配置

节点	Oracle版本	SID	db_name	db_unique_name
主库	11.2.0.4	orcl	orcl	orcl
备库	11.2.0.4	orcl	orcl	orcl_std

以上完成之后，对两台主机进行以下操作：

1）禁用防火墙

[root@db1 ~]# chkconfig iptables off
[root@db1 ~]# service iptables stop

2）禁用selinux

[root@db1 ~]# sed -i s/SELINUX=.*/SELINUX=disabled/ /etc/sysconfig/selinux
[root@db1 ~]# setenforce 0

3）配置host文件

[root@db1 ~]# cat /etc/hosts
[root@db2 ~]# echo -e '192.168.10.61 dgp \n192.168.10.62 dgs' >>/etc/hosts

备注：echo -e 表示开启转义。

4）软件准备

数据库文件如下：

p13390677_112040_Linux-x86-64_1of7.zip

p13390677_112040_Linux-x86-64_2of7.zip

创建路径 /install路径，上传安装文件并解压。

[root@db /]# mkdir /install
[root@db /]# cd /install
[root@db /]# unzip p13390677_112040_Linux-x86-64_1of7.zip
[root@db /]# unzip p13390677_112040_Linux-x86-64_1of7.zip

2.主数据库Oracle Database安装

配置最小参数

修改参数文件/etc/sysctl.conf

[root@db /] echo 'fs.suid_dumpable = 1
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default=262144
net.core.rmem_max=4194304
net.core.wmem_default=262144
net.core.wmem_max=1048586' >> /etc/sysctl.conf

执行命令使配置生效

[root@db /] /sbin/sysctl -p

修改limits.conf

添加以下内容到配置文件/etc/security/limits.conf：

[root@db /] echo 'oracle              soft    nproc   16384
oracle              hard    nproc   16384
oracle              soft    nofile  4096
oracle              hard    nofile  65536
oracle              soft    stack   10240' >> /etc/security/limits.conf

安装必要的rpm包

[root@db /] yum install -y binutils-2*x86_64* glibc-2*x86_64* nss-softokn-freebl-3*x86_64* glibc-2*i686* nss-softokn-freebl-3*i686* compat-libstdc++-33*x86_64*
yum install -y glibc-common-2*x86_64* glibc-devel-2*x86_64* glibc-devel-2*i686* glibc-headers-2*x86_64* elfutils-libelf-0*x86_64*
yum install -y elfutils-libelf-devel-0*x86_64* gcc-4*x86_64* gcc-c++-4*x86_64* ksh-*x86_64* libaio-0*x86_64*
yum install -y libaio-devel-0*x86_64* libaio-0*i686* libaio-devel-0*i686* libgcc-4*x86_64*  libgcc-4*i686* libstdc++-4*x86_64* libstdc++-4*i686* 
yum install -y libstdc++-devel-4*x86_64* make-3.81*x86_64* numactl-devel-2*x86_64* sysstat-9*x86_64* compat-libstdc++-33*i686* compat-libcap*

创建配置用户

[root@dbp /] groupadd -g 501 oinstall
groupadd -g 502 dba
groupadd -g 503 oper
groupadd -g 504 asmadmin
groupadd -g 506 asmdba
groupadd -g 505 asmoper
useradd -u 502 -g oinstall -G dba,asmdba,oper oracle

[root@dgp install]# passwd oracle
Changing password for user oracle.
New password: 
BAD PASSWORD: it is too simplistic/systematic
Retype new password: 
passwd: all authentication tokens updated successfully.

修改"/etc/security/limits.d/90-nproc.conf" 文件中的内容

将 “* soft nproc 1024”这一行修改为“* - nproc 16384”

[root@db /] cp /etc/security/limits.d/90-nproc.conf /etc/security/limits.d/90-nproc.conf_bak
[root@db /] sed -i s/.*1024/*\ -\ nproc\ 16384/ /etc/security/limits.d/90-nproc.conf

创建数据库安装路径

[root@db /] mkdir -p /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1
chown -R oracle:oinstall /u01
chmod -R 775 /u01

登录oracle用户,并在 ".bash_profile" 文件尾部添加内容。

[root@db /]# su - oracle
[oracle@db /]$ pwd
[oracle@db /]$ cat >> .bash_profile <<'EOF'

#Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR

ORACLE_HOSTNAME=dgp; export ORACLE_HOSTNAME
ORACLE_UNQNAME=orcl; export ORACLE_UNQNAME
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.2.0https://img.qb5200.com/download-x/db_1; export ORACLE_HOME
ORACLE_SID=orcl; export ORACLE_SID

PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH

LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
EOF

备注：配置备库时候：ORACLE_HOSTNAME=dgs ORACLE_UNQNAME=orcl_std ORACLE_SID=orcl

安装数据库

直接以Oracle用户登录,执行安装

[oracle@dgp /]$ cd /installhttps://img.qb5200.com/download-x/database、
[oracle@dgp /]$ ll
[oracle@dgp /]$ ./runInstaller

图形界面忽略,过程中在root用户下执行脚本。

[root@dgp]# /u01/app/oraInventory/orainstRoot.sh
[root@dgp]# /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/root.sh

备注：主库选择安装数据库软件和数据库实例，备库仅安装数据库软件。

设置Oracle Database自启动

修改/etc/oratab配置文件中每一个重起标志设置成Y：

[root@dgp /]# sed -i 's/\(orcl:\)\(.*:\)N/\1\2Y/' /etc/oratab

创建自启动配置文件/etc/init.dhttps://img.qb5200.com/download-x/dbora：

[root@dgp /]# cat >> /etc/init.dhttps://img.qb5200.com/download-x/dbora <<EOF
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
ORA_HOME=/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/binhttps://img.qb5200.com/download-x/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/binhttps://img.qb5200.com/download-x/dbstart $ORA_HOME"
touch /var/lock/subsyshttps://img.qb5200.com/download-x/dbora
;;
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/binhttps://img.qb5200.com/download-x/dbshut $ORA_HOME"
rm -f /var/lock/subsyshttps://img.qb5200.com/download-x/dbora
;;
esac
EOF

赋予执行权限，添加自启动

[root@dgp]# chmod 750 /etc/init.dhttps://img.qb5200.com/download-x/dbora
chkconfig --add dbora
chkconfig dbora on

3.备服务器Oracle Database software 安装

备服务器安装software，过程参考主库数据库安装过程。

二、正式配置

5,开始搭建配置ADG

1）主库检查归档模式等：

在主库操作：
#查看log_mode、force_logging、flashback_on
SQL> select name,log_mode,force_logging,flashback_on from v$database; 

#切换成归档模式
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE ARCHIVELOG; #修改成归档模式

#开启FORCE LOGGING
SQL> ALTER DATABASE FORCE LOGGING   #开启FORCE LOGGING

#修改归档日志路径(按需修改，这里仅仅列出供参考)
#[oracle@dgp /]$ mkdir /u01/app/oracle/archivelog
#SQL> archive log list
#SQL> alter system set log_archive_dest_1='location=/u01/app/oracle/archivelog'; 　

SQL> alter database flashback on;　　#开启flashback on
SQL> ALTER DATABASE OPEN;

2）主库添加SRL：

SQL> select * from v$log;
SQL> select * from v$logfile;
SQL> alter database add standby logfile group 11 '/u01/app/oracle/oradata/orcl/redo_std01.log' size 50M;
SQL> alter database add standby logfile group 12 '/u01/app/oracle/oradata/orcl/redo_std02.log' size 50M;
SQL> alter database add standby logfile group 13 '/u01/app/oracle/oradata/orcl/redo_std03.log' size 50M;
SQL> alter database add standby logfile group 14 '/u01/app/oracle/oradata/orcl/redo_std04.log' size 50M;

3）主库修改参数：

#修改参数（可以用sql命令修改，也可以直接修改pfile文件）
[oracle@dgp /]$ sqlplus / as sysdba
SQL > 
alter system set log_archive_config='DG_CONFIG=(orcl,orcl_std)' scope=both;
alter system set log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orcl' scope=both;  　  　#主库log路径
alter system set log_archive_dest_2='SERVICE=orcl_std  LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl_std' scope=both;　　#备库log路径
alter system set log_archive_dest_state_1='enable' scope=both;
alter system set log_archive_dest_state_2='enable' scope=both;
# alter system set db_file_name_convert='/u01/oraclehttps://img.qb5200.com/download-x/datafile','/u01/oraclehttps://img.qb5200.com/download-x/datafile' scope=both;    #主备路径一致，忽略
# alter system set log_file_name_convert='/u01/oracle/onlinelog','/u01/oracle/onlinelog' scope=both; #主备路径一致，忽略
alter system set fal_server='orcl_std' scope=both;
alter system set fal_client='orcl' scope=both;
alter system set standby_file_management='AUTO' scope=both;
alter system set db_unique_name='orcl' scope=both;

#检查主库pfile文件initorcl.ora
[oracle@dgp /]$ cat /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs/initorcl.ora
orcl.__db_cache_size=687865856
orcl.__java_pool_size=16777216
orcl.__large_pool_size=33554432
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=671088640
orcl.__sga_target=989855744
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=234881024
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.4.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/fast_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=4385144832
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.fal_client='orcl'
*.fal_server='orcl_std'
*.log_archive_dest_1='location=USE_DB_RECOVERY_FILE_DEST valid_for=(all_logfiles,all_roles) db_unique_name=orcl'
*.log_archive_dest_2='SERVICE=orcl_std LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl_std'
*.log_archive_dest_state_1='enable'
*.log_archive_dest_state_2='enable'
*.memory_target=1660944384
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.db_unique_name='orcl'
*.log_archive_config='DG_CONFIG=(orcl,orcl_std)'

检查完成确认无误后，重启数据库　　
SQL> shutdown immediate
SQL> start nomount
SQL> create spfile from pfile='/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs/initorcl.ora';    #以pfile创建新的spfile   
SQL> startup
SQL> show parameter spfile #确认以spfile启动

备注：备库的pfile、control file将安排和rman备份完成后创建，然后和其他文件一起copy至备库。

4）主库配listener.ora和tnsname.ora

（1）主库listener.ora配置：
[oracle@dgp admin]$ cat /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = orcl)
  (SID_NAME = orcl)
  )
)

LISTENER =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dgp)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    )
  )

ADR_BASE_LISTENER = /u01/app/oracle

（2）主库tnsnames.ora配置：
[oracle@dgp admin]$ cat /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/tnsnames.ora 
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = dgp)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
    )
  )

ORCL_STD =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dgs)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl_std)
    )
  )

（2）主库监听测试：
# [oracle@dgp ~]$ lsnrctl reload
[oracle@dgp ~]$ lsnrctl stop
[oracle@dgp ~]$ lsnrctl start
[oracle@dgp ~]$ lsnrctl status

[oracle@dgp ~]$ sqlplus system/****@orcl     #测试是否正常

至此主库的配置结束,下面将为备库准备相关文件。

5）RMAN备份主库

#在主库操作
[oracle@dgp ~]$ rman target /
RMAN> backup database plus archivelog

#备注：注意一下rman输出内容中的备份文件路径
#备用命令：  backup current controlfile for standby format '/XXXhttps://img.qb5200.com/download-x/dbbackup/CTL_%U';      backup database format '/XXXhttps://img.qb5200.com/download-x/dbbackup/DB_%d_%U' PLUS ARCHIVELOG;

6）创建备库pfile文件initorcl_std.ora

#在主库操作
[oracle@dgp ~]$ cd /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs
[oracle@dgp ~]$ cp initorcl.ora initorcl_std.ora
#修改initorcl_std.ora中内容，修改后的内容见下面新的initorcl_std.ora
#红色为DG相关参数，红色绿底为修改过的内容
[oracle@dgp ~]$ cat initorcl_std.ora
orcl.__db_cache_size=687865856
orcl.__java_pool_size=16777216
orcl.__large_pool_size=33554432
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=671088640
orcl.__sga_target=989855744
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=234881024
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.4.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/fast_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=4385144832
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.fal_client='orcl_std'
*.fal_server='orcl'
*.log_archive_dest_1='location=USE_DB_RECOVERY_FILE_DEST valid_for=(all_logfiles,all_roles) db_unique_name=orcl_std'
*.log_archive_dest_2='SERVICE=orcl LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=orcl'
*.log_archive_dest_state_1='enable'
*.log_archive_dest_state_2='enable'
*.memory_target=1660944384
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.db_unique_name='orcl_std'
*.log_archive_config='DG_CONFIG=(orcl,orcl_std)'

6）创建备库控制文件

#在主库操作
[oracle@dgp ~]$ sqlplus / as sysdba
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS '/u01/app/oracle/fast_recovery_area/ORCL/backupset/orcl_stby.ctl'

7）传输文件至备库

需要copy至备库的文件有：rman备份、备库pfile、备库controlfile、listener.ora、tnsnames.ora、密码文件。

在备库上创建必要目录


在备库操作：
[root@dgs ~]# su - oracle
[oracle@dgs ~]$ mkdir /u01/app/oracle/oradata/orcl/
[oracle@dgs ~]$ mkdir /u01/app/oracle/fast_recovery_area/orcl/
[oracle@dgs ~]$ mkdir /u01/app/oracle/admin/orcl/adump
[oracle@dgs ~]$ mkdir /u01/app/oracle/fast_recovery_area/ORCL/
#[oracle@dgs ~]$ mkdir /u01/app/oracle/archivelog   #忽略

在主库操作:
#配置主库oracle用户免密登录备库主机oracle用户
[oracle@dgp dbs]$ ssh-keygen   #一直按回车
[oracle@dgp dbs]$ ssh-copy-id -i .ssh/id_rsa.pub oracle@dgs  #输入备库oracle操作系统用户密码

#开始copy至备库
[oracle@dgp ~]$ scp -r /u01/app/oracle/fast_recovery_area/ORCL/backupset oracle@dgs:/u01/app/oracle/fast_recovery_area/ORCL/　　　　#controlfile 和 RMAN备份
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs/initorcl_std.ora oracle@dgs:/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs   #pfile文件initorcl_std.ora
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs/orapworcl oracle@dgs:/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs/　　　　　　#密码文件orapworcl
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/listener.ora oracle@dgs:/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin     #listener.ora
[oracle@dgp ~]$ scp /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/tnsnames.ora oracle@dgs:/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin     #tnsnames.ora

#复制备库控制文件至initorcl_std.ora指定位置（还是在主库操作，这里在主库ssh远程登录执行命令，避免切换窗口）
[oracle@dgp oracle]$ ssh oracle@dgs cp /u01/app/oracle/fast_recovery_area/ORCL/backupset/orcl_stby.ctl /u01/app/oracle/oradata/orcl/control01.ctl
[oracle@dgp oracle]$ ssh oracle@dgs cp /u01/app/oracle/fast_recovery_area/ORCL/backupset/orcl_stby.ctl /u01/app/oracle/fast_recovery_area/orcl/control02.ctl

至此，除listener.ora有待修改，备库的相关文件准备完成，下面将进入最后配置阶段。

8)备库配置监听

备库操作：

（1）修改监听件listener.ora
修改后查看，其他红色为修改的内容。
#注意：备库的SID_NAME为orcl，因此备库listener.ora静态监听SID_LIST_LISTENER中的配置SID_NAME = orcl，不能设为orcl_std,orcl_std是db_unique_name。
[oracle@dgs admin]$ cat /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/listener.ora 
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = orcl_std)
  (SID_NAME = orcl)
  )
)

LISTENER =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = dgs)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    )
  )

ADR_BASE_LISTENER = /u01/app/oracle

（2）备库的tnsnames.ora和主库一样，无需修改
（3）重启监听并验证
　　 在备库：
　　　　[oracle@dgs ~]$ lsnrctl stop
　　　　[oracle@dgs ~]$ lsnrctl start
　　　　[oracle@dgs ~]$ lsnrctl status
　　　　[oracle@dgs ~]$ sqlplus sys/******@orcl as sysdba　　　　　　 #在备库上登录主库
　　　　[oracle@dgs ~]$ sqlplus sys/******@orcl_std as sysdba　　　　#在备库上登录备库
    在主库：
　　　　[oracle@dgs ~]$ sqlplus sys/******@orcl as sysdba　　　　　　 #在主库上登录主库
　　　　[oracle@dgs ~]$ sqlplus sys/******@orcl_std as sysdba　　　　#在备库上登录备库

9）还原备库

#确认一下，至此备库相关文件均已修改完成。

备库RMAN恢复
[oracle@dgs oracle]$ export ORACLE_SID=orcl
[oracle@dgs oracle]$ sqlplus / as sysdba

SQL> create spfile from pfile='/u01/app/oracle/product/11.2.0https://img.qb5200.com/download-x/db_1https://img.qb5200.com/download-x/dbs/initorcl_std.ora';   #创建备库spfile
SQL> startup mount;
SQL> show paramter spfile;     #确认以spfile启动
SQL> exit

[oracle@dgs oracle]$ rman target /
RMAN> alter database mount;                              #或者alter database mount standby database;
RMAN> restore database；
RMAN> recover database；

10）开启同步并验证

# 此时主库数据库处于open状态，备库处于mount状态

（1）开启同步：
在备库操作
SQL> alter database open read only;
SQL> alter database recover managed standby database using current logfile disconnect from session；

（2）验证

在主库操作
SQL> create user mydb identified by ******;
SQL> alter system switch logfile;
在备库操作
SQL> select username from dba_users where name='MYDB'

查看备库应用状态
SQL> select thread#,sequence#,standby_dest,archived,applied,status from v$archived_log;

三、基本管理

1.检查状态
查看数据库状态
select open_mode,protection_mode,database_role,switchover_status from v$database;
select max(sequence#) from v$log;--检查两边的序列好，是否一致
     
主库切换日志，
alert system switch logfile;

查看备库应用状态
select thread#,sequence#,standby_dest,archived,applied,status from v$archived_log;

查看有没有GAP
select * from v$archive_dest_status where dest_id=2;
select status,gap_status from v$archive_dest_status where dest_id=2;

备库查看RFS接收日志和MRP应用日志同步主库情况

select process, sequence#,GROUP#,thread#,status,delay_mins from v$managed_standby;  #备库查询其中，其中ARCH是归档进程，RFS是归档传输进程，MRP0是日志应用进程

备库查看日志应用进度及数据库模式

select dbid,name,open_mode,current_scn,protection_mode,database_role,force_logging,open_mode,switchover_status from v$database;

2.启动数据库：
--先启备库
sql>startup nomount
sql>alter database mount standby database;
sql>alter database open;                 #或者alter database open read only;
sql>alter database recover managed standby database using current logfile disconnect from session;
        
--再启主库
sql>startup

3.关闭数据库
--先关主库：
sql>shutdown immediate

--再关备用库：
sql>alter database recover managed standby database cancel;  --停止同步
sql>shutdown immediate;

4.主备切换
待续。。。。。。

加载全部内容