VBS解包工具发老兵及海洋VBS解包工具代码

时间:2021-03-17 人气:0

想了解发老兵及海洋VBS解包工具代码的相关内容吗，在本文为您仔细讲解VBS解包工具的相关知识和一些Code实例，欢迎阅读和指正，我们先划重点：发老兵及海洋VBS解包工具代码，下面大家一起来学习吧。

关于为什么提供打包程序和打包压缩文件.MDB的解压

2006.asp　　　　　　　　　　　　　　　　海阳顶端网asp木马2006版文件　
unpack.vbs　　　　　　　　　　　　　　　　打包文件"hytop.mdb"的解开器　
2006x.exe　　　　　　　　　　　　　　　　海阳顶端网asp木马2006　c/s模式转换器　
2006x2.exe　　　　　　　　　　　　　　　　海阳顶端网asp木马2006　专用短服务器端　
　　　　　　　　　　　　　　　　　　　　　　　　c/s模式转换器　
2006z.exe　　　　　　　　　　　　　　　　海阳顶端网asp木马2006_lite版本组合器　
　　　　　　　　　　　　　　　　　　　　　　　　用来自定义生成相应功能的lite版木马　
hididi.ini　　　　　　　　　　　　　　　　2006z.exe的配置文件　

问题一：　

就是你们写的小马那个文件打包/揭开。我想知道　文件打包后，我下载下来，是.mdb后缀的，那我来怎么恢复呢，比如说是将一个文件夹打包下载后，来怎么恢复呢？　　

回答：　

请用海洋顶端asp木马2006正式版里的unpack.vbs文件进行解压！　
mdb的文件名必须为hytop.mdb（也就是默认的名字)　

VB解包工具中有三个VB文件。分别是三种马的解包工具
一个是海洋打包的解包工具。解HYTOP。MDB
一个是ADMIN（类似于海洋）。解PACKET。MDB
一个是老兵的解包工具。解TOMDB。TDB

注:你把VB脚本文件和MDB文件放在一个目录里，执行VB脚本就行了。要几分钟时间，稍等完成提示。（没有完成强行退出解的是不完整的包。）

unpack.vbs

Dim rs, ws, fso, conn, stream, connStr, theFolder 
Set rs = CreateObject("ADODB.RecordSet") 
Set stream = CreateObject("ADODB.Stream") 
Set conn = CreateObject("ADODB.Connection") 
Set fso = CreateObject("Scripting.FileSystemObject") 
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=HYTop.mdb;" 

conn.Open connStr 
rs.Open "FileData", conn, 1, 1 
stream.Open 
stream.Type = 1 

On Error Resume Next 

Do Until rs.Eof 
  theFolder = Left(rs("thePath"), InStrRev(rs("thePath"), "\")) 
  If fso.FolderExists(theFolder) = False Then 
    createFolder(theFolder) 
  End If 
  stream.SetEos() 
  stream.Write rs("fileContent") 
  stream.SaveToFile str & rs("thePath"), 2 
  rs.MoveNext 
Loop 

rs.Close 
conn.Close 
stream.Close 
Set ws = Nothing 
Set rs = Nothing 
Set stream = Nothing 
Set conn = Nothing 

Wscript.Echo "所有文件释放完毕!" 

Sub createFolder(thePath) 
  Dim i 
  i = Instr(thePath, "\") 
  Do While i > 0 
    If fso.FolderExists(Left(thePath, i)) = False Then 
      fso.CreateFolder(Left(thePath, i - 1)) 
    End If 
    If InStr(Mid(thePath, i + 1), "\") Then 
      i = i + Instr(Mid(thePath, i + 1), "\") 
     Else 
      i = 0 
    End If 
  Loop 
End Sub

打包基地老兵专用解压工具.vbs

Dim rs, ws, fso, conn, stream, connStr, theFolder 
Set rs = CreateObject("ADODB.RecordSet") 
Set stream = CreateObject("ADODB.Stream") 
Set conn = CreateObject("ADODB.Connection") 
Set fso = CreateObject("Scripting.FileSystemObject") 
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=ToMdb.mdb;" 

conn.Open connStr 
rs.Open "wz", conn, 1, 1 
stream.Open 
stream.Type = 1 

On Error Resume Next 

Do Until rs.Eof 
    thePath = rs("folder") & "\" 
    theFolder = Left(thePath, InStrRev(thePath, "\")) 
    If fso.FolderExists(theFolder) = False Then 
        createFolder(theFolder) 
    End If 
    stream.SetEos() 
    stream.Write rs("body") 
    stream.SaveToFile str & thepath & rs("file"), 2 
    rs.MoveNext 
Loop 

rs.Close 
conn.Close 
stream.Close 
Set ws = Nothing 
Set rs = Nothing 
Set stream = Nothing 
Set conn = Nothing 

Wscript.Echo "所有文件释放完毕!" 

Sub createFolder(thePath) 
    Dim i 
    i = Instr(thePath, "\") 
    Do While i > 0 
        If fso.FolderExists(Left(thePath, i)) = False Then 
            fso.CreateFolder(Left(thePath, i - 1)) 
        End If 
        If InStr(Mid(thePath, i + 1), "\") Then 
            i = i + Instr(Mid(thePath, i + 1), "\") 
         Else 
            i = 0 
        End If 
    Loop 
End Sub

海洋解压缩工具unpack.vbs

Dim rs, ws, fso, conn, stream, connStr, theFolder 
Set rs = CreateObject("ADODB.RecordSet") 
Set stream = CreateObject("ADODB.Stream") 
Set conn = CreateObject("ADODB.Connection") 
Set fso = CreateObject("Scripting.FileSystemObject") 
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Packet.mdb;" 

conn.Open connStr 
rs.Open "FileData", conn, 1, 1 
stream.Open 
stream.Type = 1 

On Error Resume Next 

Do Until rs.Eof 
  theFolder = Left(rs("thePath"), InStrRev(rs("thePath"), "\")) 
  If fso.FolderExists(theFolder) = False Then 
    createFolder(theFolder) 
  End If 
  stream.SetEos() 
  stream.Write rs("fileContent") 
  stream.SaveToFile str & rs("thePath"), 2 
  rs.MoveNext 
Loop 

rs.Close 
conn.Close 
stream.Close 
Set ws = Nothing 
Set rs = Nothing 
Set stream = Nothing 
Set conn = Nothing 

Wscript.Echo "所有文件释放完毕!" 

Sub createFolder(thePath) 
  Dim i 
  i = Instr(thePath, "\") 
  Do While i > 0 
    If fso.FolderExists(Left(thePath, i)) = False Then 
      fso.CreateFolder(Left(thePath, i - 1)) 
    End If 
    If InStr(Mid(thePath, i + 1), "\") Then 
      i = i + Instr(Mid(thePath, i + 1), "\") 
     Else 
      i = 0 
    End If 
  Loop 
End Sub

加载全部内容

VBS解包工具 发老兵及海洋VBS解包工具代码

unpack.vbs

VBS解包工具发老兵及海洋VBS解包工具代码