从零开始openGL—— 二、 基本图形绘制
ITryagain 人气:0前言
这是从零开始openGL系列文章的第二篇，在上篇文章中介绍了基本的环境配置，这篇文章将介绍如何绘制基本图形（圆、三角形、立方体、圆柱、圆锥）。
基本框架
下面这里我先给出opengl的3D绘图的基本框架
#include <windows.h>
#include <string.h>
#include <stdlib.h>
#include <gl\glui.h>
#include <math.h>
#include "common.h"
int g_xform_mode = TRANSFORM_NONE;
int g_main_window;
double g_windows_width, g_windows_height;
CObj g_obj;
//the lighting
static GLfloat g_light0_ambient[] = {0.0f, 0.0f, 0.0f, 1.0f};//环境光
static GLfloat g_light0_diffuse[] = {1.0f, 1.0f, 1.0f, 1.0f};//散射光
static GLfloat g_light0_specular[] = {1.0f,1.0f,1.0f,1.0f}; //镜面光
static GLfloat g_light0_position[] = {0.0f, 0.0f, 100.0f, 0.0f};//光源的位置。第4个参数为1，表示点光源；第4个参数量为0，表示平行光束{0.0f, 0.0f, 10.0f, 0.0f}
static GLfloat g_material[] = {0.96f, 0.8f, 0.69f, 1.0f};//材质
static GLfloat g_rquad = 0;
static GLfloat g_rquad_x = 0;
static GLfloat g_rquad_y = 0;
static float g_x_offset = 0.0;
static float g_y_offset = 0.0;
static float g_z_offset = 0.0;
static float g_scale_size = 1;
static int g_press_x; //鼠标按下时的x坐标
static int g_press_y; //鼠标按下时的y坐标
const int n = 1000;
const GLfloat R = 0.5f;
const GLfloat Pi = 3.1415926536f;
int g_view_type = VIEW_FLAT;
int g_draw_content = SHAPE_TRIANGLE;
void DrawTriangle()
{//绘制三角形
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
glBegin(GL_TRIANGLES);
glNormal3f(0.0f, 0.0f, 1.0f); //指定面法向
glVertex3f( 0.0f, 1.0f, 0.0f); // 上顶点
glVertex3f(-1.0f,-1.0f, 0.0f); // 左下
glVertex3f( 1.0f,-1.0f, 0.0f); // 右下
glEnd();
glFlush();
}
void DrawCube()
{//绘制立方体
glBegin(GL_QUADS);
glNormal3f( 0.0f, 0.0f, 1.0f); //指定面法向
glVertex3f( 1.0f, 1.0f,1.0f); //列举面顶点数据，逆时针顺序
glVertex3f(-1.0f, 1.0f, 1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
glVertex3f( 1.0f,-1.0f, 1.0f);
//前----------------------------
glNormal3f( 0.0f, 0.0f,-1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
glVertex3f( 1.0f, 1.0f,-1.0f);
glVertex3f( 1.0f,-1.0f,-1.0f);
//后----------------------------
glNormal3f( 0.0f, 1.0f, 0.0f);
glVertex3f( 1.0f, 1.0f, 1.0f);
glVertex3f( 1.0f, 1.0f,-1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
glVertex3f(-1.0f, 1.0f, 1.0f);
//上----------------------------
glNormal3f( 0.0f,-1.0f, 0.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f( 1.0f,-1.0f,-1.0f);
glVertex3f( 1.0f,-1.0f, 1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
//下----------------------------
glNormal3f( 1.0f, 0.0f, 0.0f);
glVertex3f( 1.0f, 1.0f, 1.0f);
glVertex3f( 1.0f,-1.0f, 1.0f);
glVertex3f( 1.0f,-1.0f,-1.0f);
glVertex3f( 1.0f, 1.0f,-1.0f);
//右----------------------------
glNormal3f(-1.0f, 0.0f, 0.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
glVertex3f(-1.0f, 1.0f, 1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
//左----------------------------*/
glEnd();
glFlush();
}
void DrawCircle()
{//绘制圆
glBegin(GL_POLYGON);
glNormal3f(0.0f, 0.0f, 1.0f);
for (int i = 0; i < n; ++i) {
glVertex2f(R*cos(2 * Pi / n * i), R*sin(2 * Pi / n * i));
}
glEnd();
}
void DrawCylinder()
{//绘制圆柱
}
void DrawTorus()
{
}void myInit()
{
glClearColor(1.0f, 1.0f, 1.0f, 1.0f);//用白色清屏
glLightfv(GL_LIGHT0, GL_AMBIENT, g_light0_ambient);//设置场景的环境光
glLightfv(GL_LIGHT0, GL_DIFFUSE, g_light0_diffuse);//设置场景的散射光
glLightfv(GL_LIGHT0, GL_POSITION, g_light0_position);//设置场景的位置
glMaterialfv(GL_FRONT, GL_DIFFUSE, g_material);//指定用于光照计算的当前材质属性
glEnable(GL_TEXTURE_2D);
glEnable(GL_LIGHTING);//开启灯光
glEnable(GL_LIGHT0);//开启光照0
glShadeModel(GL_SMOOTH); //设置着色模式为光滑着色
glEnable(GL_DEPTH_TEST);//启用深度测试
glMatrixMode(GL_MODELVIEW); //指定当前矩阵为模型视景矩阵
glLoadIdentity(); //将当前的用户坐标系的原点移到了屏幕中心：类似于一个复位操作
gluLookAt(0.0, 0.0, 8.0, 0, 0, 0, 0, 1.0, 0);//该函数定义一个视图矩阵，并与当前矩阵相乘.
//第一组eyex, eyey,eyez 相机在世界坐标的位置;第二组centerx,centery,centerz 相机镜头对准的物体在世界坐标的位置;第三组upx,upy,upz 相机向上的方向在世界坐标中的方向
}void myGlutDisplay() //绘图函数， 操作系统在必要时刻就会对窗体进行重新绘制操作
{
glClear( GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT ); //清除颜色缓冲以及深度缓冲
glEnable(GL_NORMALIZE); //打开法线向量归一化，确保了法线的长度为1
glMatrixMode(GL_MODELVIEW);//模型视图矩阵
glPushMatrix(); //压入当前矩阵堆栈
if (g_draw_content == SHAPE_MODEL)
{//绘制模型
}
else if (g_draw_content == SHAPE_TRIANGLE) //画三角形
{
glLoadIdentity();
glTranslatef(0.0f, 0.0f, -6.0f);
DrawTriangle();
}
else if(g_draw_content == SHAPE_CUBE) //画立方体
{
glLoadIdentity();
glTranslatef(0.0f, 0.0f, -6.0f);
glRotatef(g_rquad, g_rquad, g_rquad, 1.0f); // 在XYZ轴上旋转立方体
DrawCube();
g_rquad+=0.2f;// 增加旋转变量
}
else if (g_draw_content == SHAPE_CIRCLE) // 画圆
{
glLoadIdentity();
glTranslatef(0.0f, 0.0f, -6.0f);
DrawCircle();
}
else if (g_draw_content == SHAPE_CYLINDER)
{//TODO: 添加画圆柱的代码
}
else if (g_draw_content == SHAPE_TORUS)
{//TODO：添加画圆环的代码
}
glPopMatrix();
glutSwapBuffers(); //双缓冲
}
void myGlutReshape(int x,int y) //当改变窗口大小时的回调函数
{
if (y == 0)
{
y = 1;
}
g_windows_width = x;
g_windows_height = y;
double xy_aspect = (float)x / (float)y;
GLUI_Master.auto_set_viewport(); //自动设置视口大小
glMatrixMode( GL_PROJECTION );//当前矩阵为投影矩阵
glLoadIdentity();
gluPerspective(60.0, xy_aspect, 0.01, 1000.0);//视景体
glutPostRedisplay(); //标记当前窗口需要重新绘制
}
void myGlutKeyboard(unsigned char Key, int x, int y)
{//键盘时间回调函数
}
void myGlutMouse(int button, int state, int x, int y)
{
if (state == GLUT_DOWN) //鼠标的状态为按下
{
g_press_x = x;
g_press_y = y;
if (button == GLUT_LEFT_BUTTON)
{//按下鼠标的左键表示对模型进行旋转操作
g_xform_mode = TRANSFORM_ROTATE;
}
else if (button == GLUT_RIGHT_BUTTON)
{//按下鼠标的右键表示对模型进行平移操作
g_xform_mode = TRANSFORM_TRANSLATE;
}
else if (button == GLUT_MIDDLE_BUTTON)
{//按下鼠标的滑轮表示按下鼠标的右键表示对模型进行缩放操作
g_xform_mode = TRANSFORM_SCALE;
}
}
else if (state == GLUT_UP)
{//如果没有按鼠标，则不对模型进行任何操作
g_xform_mode = TRANSFORM_NONE;
}
}
void myGlutMotion(int x, int y) //处理当鼠标键摁下时,鼠标拖动的事件
{
if (g_xform_mode == TRANSFORM_ROTATE) //旋转
{//TODO:添加鼠标移动控制模型旋转参数的代码
}
else if(g_xform_mode == TRANSFORM_SCALE) //缩放
{//TODO:添加鼠标移动控制模型缩放参数的代码
}
else if(g_xform_mode == TRANSFORM_TRANSLATE) //平移
{//TODO:添加鼠标移动控制模型平移参数的代码
}
// force the redraw function
glutPostRedisplay();
}
void myGlutIdle(void) //空闲回调函数
{
if ( glutGetWindow() != g_main_window )
glutSetWindow(g_main_window);
glutPostRedisplay();
}
void glui_control(int control ) //处理控件的返回值
{
switch(control)
{
case CRTL_LOAD://选择“open”控件
loadObjFile();
g_draw_content = SHAPE_MODEL;
break;
case CRTL_CHANGE://选择Type面板
if (g_view_type == VIEW_POINT)
{
glPolygonMode(GL_FRONT_AND_BACK, GL_POINT); // 设置两面均为顶点绘制方式
}
else if (g_view_type == VIEW_WIRE)
{
glPolygonMode(GL_FRONT_AND_BACK, GL_LINE); // 设置两面均为线段绘制方式
}
else
{
glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); // 设置两面为填充方式
}
break;
case CRTL_TRIANGLE:
g_draw_content = SHAPE_TRIANGLE;
break;
case CRTL_CUBE:
g_draw_content = SHAPE_CUBE;
break;
case CRTL_CIRCLE:
g_draw_content = SHAPE_CIRCLE;
break;
case CRTL_CYLINDER:
g_draw_content = SHAPE_CYLINDER;
break;
case CRTL_CONE:
g_draw_content = SHAPE_TORUS;
break;
case CRTL_MODEL:
g_draw_content = SHAPE_MODEL;
break;
default:
break;
}
}
void myGlui()
{
GLUI_Master.set_glutDisplayFunc( myGlutDisplay ); //注册渲染事件回调函数， 系统在需要对窗体进行重新绘制操作时调用
GLUI_Master.set_glutReshapeFunc( myGlutReshape ); //注册窗口大小改变事件回调函数
GLUI_Master.set_glutKeyboardFunc( myGlutKeyboard );//注册键盘输入事件回调函数
glutMotionFunc( myGlutMotion);//注册鼠标移动事件回调函数
GLUI_Master.set_glutMouseFunc( myGlutMouse );//注册鼠标点击事件回调函数
GLUI_Master.set_glutIdleFunc(myGlutIdle); //为GLUI注册一个标准的GLUT空闲回调函数，当系统处于空闲时,就会调用该注册的函数
//GLUI
GLUI *glui = GLUI_Master.create_glui_subwindow( g_main_window, GLUI_SUBWINDOW_RIGHT); //新建子窗体，位于主窗体的右部
new GLUI_StaticText(glui, "GLUI" ); //在GLUI下新建一个静态文本框，输出内容为“GLUI”
new GLUI_Separator(glui); //新建分隔符
new GLUI_Button(glui,"Open", CRTL_LOAD, glui_control); //新建按钮控件，参数分别为：所属窗体、名字、ID、回调函数，当按钮被触发时,它会被调用.
new GLUI_Button(glui, "Quit", 0,(GLUI_Update_CB)exit );//新建退出按钮，当按钮被触发时,退出程序
GLUI_Panel *type_panel = glui->add_panel("Type" ); //在子窗体glui中新建面板，名字为“Type”
GLUI_RadioGroup *radio = glui->add_radiogroup_to_panel(type_panel, &g_view_type, CRTL_CHANGE, glui_control); //在Type面板中添加一组单选按钮
glui->add_radiobutton_to_group(radio, "points");
glui->add_radiobutton_to_group(radio, "wire");
glui->add_radiobutton_to_group(radio, "flat");
GLUI_Panel *draw_panel = glui->add_panel("Draw" ); //在子窗体glui中新建面板，名字为“Draw”
new GLUI_Button(draw_panel,"Triangle",CRTL_TRIANGLE,glui_control);
new GLUI_Button(draw_panel,"Cube",CRTL_CUBE,glui_control);
new GLUI_Button(draw_panel,"Circle",CRTL_CIRCLE,glui_control);
new GLUI_Button(draw_panel,"Cylinder",CRTL_CYLINDER,glui_control);
new GLUI_Button(draw_panel,"Torus",CRTL_CONE,glui_control);
new GLUI_Button(draw_panel,"Model",CRTL_MODEL,glui_control);
glui->set_main_gfx_window(g_main_window ); //将子窗体glui与主窗体main_window绑定，当窗体glui中的控件的值发生过改变，则该glui窗口被重绘
GLUI_Master.set_glutIdleFunc( myGlutIdle );
}
int main(int argc, char* argv[]) //程序入口
{
/****************************************/
/* Initialize GLUT and create window */
/****************************************/
freopen("log.txt", "w", stdout);//重定位，将输出放入log.txt文件中
glutInit(&argc, argv);//初始化glut
glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE | GLUT_DEPTH);//初始化渲染模式
glutInitWindowPosition(200, 200); //初始化窗口位置
glutInitWindowSize(800, 600); //初始化窗口大小
g_main_window = glutCreateWindow("Model Viewer"); //创建主窗体Model Viewer
myGlui();
myInit();
glutMainLoop();//进入glut消息循环
return EXIT_SUCCESS;
}
#ifndef COMMON #define COMMON #define VIEW_POINT 0x00 #define VIEW_WIRE 0x01 #define VIEW_FLAT 0x02 #define CRTL_LOAD 0x00 #define CRTL_CHANGE 0x01 #define CRTL_TRIANGLE 0x02 #define CRTL_CUBE 0x03 #define CRTL_CIRCLE 0x04 #define CRTL_CYLINDER 0x05 #define CRTL_CONE 0x06 #define CRTL_MODEL 0x07 #define SHAPE_TRIANGLE 0x00 #define SHAPE_CUBE 0x01 #define SHAPE_CIRCLE 0x02 #define SHAPE_CYLINDER 0x03 #define SHAPE_TORUS 0x04 #define SHAPE_MODEL 0x05 #define TRANSFORM_NONE 0x51 #define TRANSFORM_ROTATE 0x52 #define TRANSFORM_SCALE 0x53 #define TRANSFORM_TRANSLATE 0x54 #endif
运行这段代码可以得到如下所示的结果
图形绘制
在上面那段代码中，已经给出了三角形、圆、正方体的绘制代码，下面还将介绍圆柱与圆环的绘制
圆
在opengl中并不能直接绘制圆，那么，此时想到了极限的方法，如果把圆分割成很多个扇形，这个扇形的角度足够小的话，那么曲线自然可以看作直线。有了这个思路，代码就很好写了。
void DrawCircle()
{//绘制圆
glBegin(GL_POLYGON);
glNormal3f(0.0f, 0.0f, 1.0f);
for (int i = 0; i < n; ++i) {
glVertex2f(R*cos(2 * Pi / n * i), R*sin(2 * Pi / n * i));
}
glEnd();
}
三角形
三角形的绘制就十分的简单了，确定三个顶点，然后连线
void DrawTriangle()
{//绘制三角形
glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
glBegin(GL_TRIANGLES);
glNormal3f(0.0f, 0.0f, 1.0f); //指定面法向
glVertex3f( 0.0f, 1.0f, 0.0f); // 上顶点
glVertex3f(-1.0f,-1.0f, 0.0f); // 左下
glVertex3f( 1.0f,-1.0f, 0.0f); // 右下
glEnd();
glFlush();
}
立方体
原理同三角形，确定八个顶点坐标，然后连线，不过这里要注意的是立方体为3D图形，要展示光照效果的话需要在绘制的时候确定各个面的法向量。
void DrawCube()
{//绘制立方体
glBegin(GL_QUADS);
glNormal3f( 0.0f, 0.0f, 1.0f); //指定面法向
glVertex3f( 1.0f, 1.0f,1.0f); //列举面顶点数据，逆时针顺序
glVertex3f(-1.0f, 1.0f, 1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
glVertex3f( 1.0f,-1.0f, 1.0f);
//前----------------------------
glNormal3f( 0.0f, 0.0f,-1.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
glVertex3f( 1.0f, 1.0f,-1.0f);
glVertex3f( 1.0f,-1.0f,-1.0f);
//后----------------------------
glNormal3f( 0.0f, 1.0f, 0.0f);
glVertex3f( 1.0f, 1.0f, 1.0f);
glVertex3f( 1.0f, 1.0f,-1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
glVertex3f(-1.0f, 1.0f, 1.0f);
//上----------------------------
glNormal3f( 0.0f,-1.0f, 0.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f( 1.0f,-1.0f,-1.0f);
glVertex3f( 1.0f,-1.0f, 1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
//下----------------------------
glNormal3f( 1.0f, 0.0f, 0.0f);
glVertex3f( 1.0f, 1.0f, 1.0f);
glVertex3f( 1.0f,-1.0f, 1.0f);
glVertex3f( 1.0f,-1.0f,-1.0f);
glVertex3f( 1.0f, 1.0f,-1.0f);
//右----------------------------
glNormal3f(-1.0f, 0.0f, 0.0f);
glVertex3f(-1.0f,-1.0f,-1.0f);
glVertex3f(-1.0f,-1.0f, 1.0f);
glVertex3f(-1.0f, 1.0f, 1.0f);
glVertex3f(-1.0f, 1.0f,-1.0f);
//左----------------------------*/
glEnd();
glFlush();
}
圆柱
对于圆柱的绘制，思想同圆十分相似，就是分割。不过需要注意的是上下两个圆面和一个侧面需要分开来绘制。这里需要思考的是这个侧面该如何绘制呢？想象以下，把圆柱侧面展开，我们得到的是一个矩形，那分割成小片段的话也就是矩形了，即绘制无数个矩形，然后拼接形成侧面。
注：绘制时注意法向量的选取
void DrawCylinder()
{//绘制圆柱
//glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR);
glBegin(GL_POLYGON);
glNormal3f(0.0f, 1.0f, 0.0f);
for (int i = 1; i < n; i++) {
glVertex3f(R*cos(2 * Pi / n * i), 1.0f, R*sin(2 * Pi / n * i));
}
glEnd();
glBegin(GL_POLYGON);
glNormal3f(0.0f, -1.0f, 0.0f);
for (int i = 1; i < n; i++) {
glVertex3f(R*cos(2 * Pi / n * i), 0.0f, R*sin(2 * Pi / n * i));
}
glEnd();
glBegin(GL_QUADS);
for (int i = 1; i <= n; i++)
{
glNormal3f(R*cos(2 * Pi / n * i), 0.0f, R*sin(2 * Pi / n * i));
glVertex3f(R*cos(2 * Pi / n * i), 1.0f, R*sin(2 * Pi / n * i));
glVertex3f(R*cos(2 * Pi / n * i), 0.0f, R*sin(2 * Pi / n * i));
glNormal3f(R*cos(2 * Pi / n * (i + 1)), 0.0f, R*sin(2 * Pi / n * (i + 1)));
glVertex3f(R*cos(2 * Pi / n * (i + 1)), 0.0f, R*sin(2 * Pi / n * (i + 1)));
glVertex3f(R*cos(2 * Pi / n * (i + 1)), 1.0f, R*sin(2 * Pi / n * (i + 1)));
}
glEnd();
}
圆环
圆环的绘制稍微有些麻烦，先来看看下面这个圆环的线图
这里的难点就是各点的坐标表示，首先我们需要做的是把圆环压缩成一个圆面
压缩之后的表示为 R+r*cos(θ)，然后再把压缩完后的点映射到x y轴上
X轴：(R+r*cos(θ))*cosα
Y轴：(R+r*cos(θ))*sinα
Z轴：r*sin(θ)
这样，我们的圆环就可以实现了
void DrawTorus()
{
int num = n / 50;
for (int i = 0; i < num; i++)
{
glBegin(GL_QUAD_STRIP);
for (int j = 0; j <= num; j++)
{
for (int k = 1; k >= 0; k--)
{
double s = (i + k) % num + 0.5;
double t = j % num;
glNormal3f(cos(2 * Pi / num * s) * cos(2 * Pi / num * t), cos(2 * Pi / num * s)*sin(2 * Pi / num * t), sin(2 * Pi / num * s));
glVertex3f((1 + R*cos(2 * Pi / num * s))*cos(2 * Pi / num * t), (1 + R*cos(2 * Pi / num * s))*sin(2 * Pi / num * t), R*sin(2 * Pi / num * s));
}
}
glEnd();
}
}
小节
以上介绍了如何使用opengl绘制基本图形，下篇文章中将介绍如何使用opengl加载绘制模型，以及鼠标交互的实现。
加载全部内容